ABSTRACT
The air of this project is to design and fabricate a bench shearing machine which can complete favorably with the imported ones.
this machine is designed and fabricate, using our cheap and available materials.
Some qualities such as durability, reliability and portability are guaranteed.
It is functional and can cut or shear a metal of up to 4mm thickness
It is recommended for use in all the work shop cutting operation.
The machine being operated manually is an added advantage to compare with imported type and power backsaw since it compels with them.
It can be useful in work-shops where cutting operation is needed and there is no electricity.
TABLE OF CONTENT
Title Page
Letter of Transmittal
Approval Page
Release Note
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE
Introduction
CHAPTER TWO
Literature Review
CHAPTER THREE
Design Calculation
Method of Production
Mode of Operation
CHAPTER FOUR
Material Selection
Component Parts
Heat Treatment
Hardness Test
Strength of Component
CHAPTER FIVE
Cost Analysis
Test and Result
Maintenance (Precautions)
CHAPTER SIX
Recommendation (Observation)
Conclusions
Reference
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2013, 02). The Construction And Fabrication Of Bench Shearing Machine.. ProjectStoc.com. Retrieved 02, 2013, from https://projectstoc.com/read/928/the-construction-and-fabrication-of-bench-shearing-machine
"The Construction And Fabrication Of Bench Shearing Machine." ProjectStoc.com. 02 2013. 2013. 02 2013 <https://projectstoc.com/read/928/the-construction-and-fabrication-of-bench-shearing-machine>.
"The Construction And Fabrication Of Bench Shearing Machine.." ProjectStoc.com. ProjectStoc.com, 02 2013. Web. 02 2013. <https://projectstoc.com/read/928/the-construction-and-fabrication-of-bench-shearing-machine>.
"The Construction And Fabrication Of Bench Shearing Machine.." ProjectStoc.com. 02, 2013. Accessed 02, 2013. https://projectstoc.com/read/928/the-construction-and-fabrication-of-bench-shearing-machine.
- Related Works
- Design And Implementation Of A Computerized Financial Accounting System For A Hotel Industry (a Case Study Of Modotel Hotel, Okpara Avenue Enugu)
- Design And Construction Of A Manual Chips Packaging Machine
- Parametric Performance Evaluation Of A Window Unit Air-conditioner And Its Maintenance
- Design And Construction Of Motorised Wheel Barrow
- The Design And Fabrication Of A Pressurized Kerosene Oven (60 X 90)
- Fabrication Of The A Metallic Bookshelf
- Design And Fabrication Of A Pilot Production Plant For Paints (emulsion And Texcoat)
- A Termpaper On Types, Selection And Design Of Bearing
- Design And Construction Of Metallic Bookshelf
- An Overview Of Remediation Techniques Of The Environment