ABSTRACT
Books are used recoding of what is happening or event that has already taken place which can be storing information it is useful and for the information that such books contained not to cost it support to be properly kept and these can be done when those books are kept in a cool dry place and a place free from rodents and insects attacked
Therefore, our contribution to proper storage of books is the deigns and construction of a metallic bookshelf that will be economically cheap and equally meet up its demands.
TABLE PAGE
Title Page
Transmittal
Release
Signature
Approval Page
Dedication
Abstract
Table of Content
CHAPTER ONE
1.1 Introduction
1.2 Description of the Metal Book Shelf
CHAPTER TWO
2.1 Design
2.2 Design Analysis
2.3 Capacity Of The Bookshelf
CHAPTER THREE
3.1 Material Selection
3.2 Tools/ Equipment Used
3.3 Sequence of Operation
CHAPTER FOUR
4.1 Cost Analysis
CHAPTER FIVE
5.1 Conclusion
5.2 Recommendation
5.3 Reference
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2013, 03). Design And Construction Of Metallic Bookshelf.. ProjectStoc.com. Retrieved 03, 2013, from https://projectstoc.com/read/1148/design-and-construction-of-metallic-bookshelf
"Design And Construction Of Metallic Bookshelf." ProjectStoc.com. 03 2013. 2013. 03 2013 <https://projectstoc.com/read/1148/design-and-construction-of-metallic-bookshelf>.
"Design And Construction Of Metallic Bookshelf.." ProjectStoc.com. ProjectStoc.com, 03 2013. Web. 03 2013. <https://projectstoc.com/read/1148/design-and-construction-of-metallic-bookshelf>.
"Design And Construction Of Metallic Bookshelf.." ProjectStoc.com. 03, 2013. Accessed 03, 2013. https://projectstoc.com/read/1148/design-and-construction-of-metallic-bookshelf.
- Related Works
- Repair And Rehabilitation Of A Faulty Air- Conditioner In Engr. Ayogu And Okpe’s Office At Institute Of Management And Technology (imt) Enugu
- Design And Construction Of A Manual Chips Packaging Machine
- Design And Fabrication Of An Air Compressed Engine
- Students Industrial Work Experience Scheme In Nigeria Railway Corporation Enugu.
- Fabrication Of Metal Shelf
- Construction Of An Electrical Stove With Three-oven Apartment
- Construction Of Flow Nozzle
- Construction Of A Potable Electric Operated With Radio Control (wireless Remote) Motor Vehicle For Long Valve Bus
- Design And Construction Of Slab For Water Reservoir
- The Design And Fabrication Of A Pressurized Kerosene Oven (60 X 90)