ABSTRACT
The process involved in the design and fabrication of a creep material testing equipment ranges from carrying out the feasibility studies of the project to the designed and especially of ensuring its functionality. Since it is used in the testing of failure of material under loading, different engineering principles employed in the design and fabrication includes bending moments and deflection of beam etc. the main objective of this project is to design a mechanical structure that can test the failure of substance hence creep s defined as the failure of substance under continuous loading. It also involves the cutting of the specimen that will be used to conducting the test.
After the completion of the different components of the machine, it is assembled and a test turn conducted.
As a result, it was finally observed that creep material testing equipment is used in determining the failure of material under continual loading.
TABLE OF CONTENTS
TITLE PAGE
LETTER OF TRANSMITAL
RELEASE PAGE
CERTIFICAITON
APPROVAL PAGE
DEDICAITION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENTS
CHAPTER ONE
1.0 INTRODCUTION
1.10 CREEP CONCEPT
1.11 CREEP TESTING MACHINES
1.12 THE PURPSOE OF THE PROJECT
1.13 DEMAND FOR THE EQUIPMENT
1.14 LITERATURE REVIEW
1.15 KINDS OF PHENOMNA
1.16 EXAMPLES
1.17 MECHANISM
CHAPTER TWO
2.0 DESCRIPTION OF APARATUS AND DESIGN THEORY
2.10 STATIC EQUILIBRIUM CONDITION
2.11 PRINCIPAL OF DEFLECTION IN CANTILEVER
2.12 CANTILEVER WITH UNIFORMLY DISTRIBUTED LOAD W PER UNIT LENGTH
2.13 BENDING ANALYSIS FOR A C-CHANNEL SECTION
CHAPTER THREE
3.0 CALCUALTION
3.10 CALCULATING THE MOMENT OF INERTIA OF THE C-SECTION USING GRAPHIC METHOD
3.11 CALCULATION OF THE MAXIMUM LOAD
3.12 CALCULATION THE BENDING MOMENT
CHAPTER FOUR
4.0 FABRICATION
4.10 EXPERIMENTAL PROCEDURE AND RESULT
4.11 LEAD SPECIMEN AT OTHER TEMPERATURES
4.12 METHOD OF ASSEMBLY
4.13 PRINCIPAL OF OPERATION
CHAPTER FIVE
5.0 BILL OF QUANTITIES
5.10 POSSIBLE PROBLEMS OF CREEP TESTING EQUIPMENT AND RECOMMENDATION
5.11 FUTURE OF THE TECHNOLOGY
5.12 SCALE
5.13 CONCLUSION
5.14 REFERENCES
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 12). Design And Fabrication Of Creep Material Testing Equipment.. ProjectStoc.com. Retrieved 12, 2014, from https://projectstoc.com/read/5714/design-and-fabrication-of-creep-material-testing-equipment-2369
"Design And Fabrication Of Creep Material Testing Equipment." ProjectStoc.com. 12 2014. 2014. 12 2014 <https://projectstoc.com/read/5714/design-and-fabrication-of-creep-material-testing-equipment-2369>.
"Design And Fabrication Of Creep Material Testing Equipment.." ProjectStoc.com. ProjectStoc.com, 12 2014. Web. 12 2014. <https://projectstoc.com/read/5714/design-and-fabrication-of-creep-material-testing-equipment-2369>.
"Design And Fabrication Of Creep Material Testing Equipment.." ProjectStoc.com. 12, 2014. Accessed 12, 2014. https://projectstoc.com/read/5714/design-and-fabrication-of-creep-material-testing-equipment-2369.
- Related Works
- The Design And Fabrication Of An Electric Popcorn Frying Machine
- An Electric Pop-corn Machine
- Engineering Drawing In Terms Of Communication
- Design And Construction Of A Motorised Wheel Barrow
- Construction Of Industrial Wheel Barrow
- Repair Of A Faulty Refrigerator In The Mechanical Engineering Department Of The Institute Of Management And Technology, Enugu
- Design And Fabrication Of A Mechanism For Opening And Closing Of High Window Of A Church
- Repair And Rehabilitation Of A Faulty Air- Conditioner In Engr. Ayogu And Okpe’s Office At Institute Of Management And Technology (imt) Enugu
- Design And Fabrication Of 80cm X 70cm X 50cm Mobile Deep Freezer
- Construction Of A Model Shell And Tube Heat Exchanger