ABSTRACT
The project work “Construction of standard steel cupboard†was constructed at the mechanical workshop. During the construction, various hand and machinery tools (equipment) such as electric welding machine, hammers, guillote, folding machine, spraying machine, milling machine, steel rule, hard saw, center punch, scribbers, tri-square, drawing board and other vital and useful tools was used.
However, before the standard structure of the steel cupboard was (produced), various procedures was strictly followed effectively which are as follows; marking and sketching operation to obtain the required dimension of 4.6ft by 3.6ft by 2ft also the dimension for door, plan and back was also measured and cut out as follows; 2ft by 1ft6, 3.6ft by 2ft, and 3.6ft by 4.6ft respectively.
Moreso, the cut sheet was welded appropriately and filing operation was carried out to obtain smooth surface. Then to void destruction of the cupboard through corrosion, chemical; attacks and other environmental agent and for esthetic surface, painting operation was done. To avoid accident and injury during the construction, safety precautions were taken. Such as wearing of eye goggles during filing operation, respiratory mask was also wearied during spraying and so on. The steel cupboard constructed can be used to preserved books and other valuable items.
TABLE OF CONTENTS
Title page
Dedication
Acknowledgement
Abstract
Table of contents
CHAPTER ONE
Introduction
CHAPTER TWO
Literature review
CHAPTER THREE
Construction materials
CHAPTER FOUR
Constructional procedure
CHAPTER FIVE
Safety precautions in cupboard
Construction
CHAPTER SIX
Discussion
CHAPTER SEVEN
Conclusion and recommendation
Reference
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2012, 12). Construction Of Steel Cupboard.. ProjectStoc.com. Retrieved 12, 2012, from https://projectstoc.com/read/486/construction-of-steel-cupboard
"Construction Of Steel Cupboard." ProjectStoc.com. 12 2012. 2012. 12 2012 <https://projectstoc.com/read/486/construction-of-steel-cupboard>.
"Construction Of Steel Cupboard.." ProjectStoc.com. ProjectStoc.com, 12 2012. Web. 12 2012. <https://projectstoc.com/read/486/construction-of-steel-cupboard>.
"Construction Of Steel Cupboard.." ProjectStoc.com. 12, 2012. Accessed 12, 2012. https://projectstoc.com/read/486/construction-of-steel-cupboard.
- Related Works
- The Design And Cosntruction Of 1000kwa Stabilizer A Project Presented To The Department Of Electrical/electronics Engineering
- Construction Of A Model Shell And Tube Heat Exchanger
- Construction Of Flow Nozzle
- Thermodynamic Principle Of Energy Conversion
- Design And Construction Of A Metallic Book Shelf
- Plant Maintenance And Services
- Automobile Motor Vehicle Construction
- Report On Construction Of Nylon Sealing And Cutting Machine
- Construction Of Packed Distillation Column
- Design And Fabrication Of A Pilot Production Plant For Paints (emulsion And Texcoat)