ABSTRACT
The technical report presented below is based on the design of mechanism that can be used to open and shut the windows of mechanical engineering workshop from ground level .this mechanism was designed in order to improve safety and convince in their workshop .in the report, the design analysis were made and materials were selected based on operating conditions of each component.
The material of the tilt and turn mechanism is cast iron while the material of the lever (handle) is stainless steel. The cost analysis was also done in order to verify the total cost that will be incurred in the construction process.
1.1 INTRODUCTION
The word window originates from the Old Norse 'vindauga', from 'vindwind' and 'auga–eye', i.e., wind eye. In Norwegian Nynorsk and Icelandic the Old Norse form has survived to this day (in Icelandic only as a less used synonym to gluggi), in Swedish the word vindöga remains as a term for a hole through the roof of a hut, and in the Danish language 'vindue' and Norwegian Bokmål 'vindu', the direct link to 'eye' is lost, just like for 'window'. The Danish (but not the Bokmål) word is pronounced fairly similarly to window. Window is first recorded in the early 13th century, and originally referred to an unglazed hole in a roof. Window replaced the Old English eagþyrl, which literally means 'eye-hole,' and 'eagduru' 'eye-door'. Many Germanic languages however adopted the Latin word 'fenestra' to describe a window with glass, such as standard Swedish 'fönster', or German 'Fenster'. The use of window in English is probably because of the Scandinavian influence on the English language by means of loanwords during the Viking Age. In English the word fenester was used as a parallel until the mid-18th century and fenestration is still used to describe the arrangement of windows within a façade. Also, words such as "defenestration" are in use, meaning to throw something out of a window. From Webster's 1828 Dictionary: Window, n. [G. The vulgar pronunciation is windor, as if from the Welsh, wind-door.
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 10). Design And Fabrication Of A Mechanism For Opening And Closing Of High Window Of A Church.. ProjectStoc.com. Retrieved 10, 2014, from https://projectstoc.com/read/3498/design-and-fabrication-of-a-mechanism-for-opening-and-closing-of-high-window-of-a-church-7593
"Design And Fabrication Of A Mechanism For Opening And Closing Of High Window Of A Church." ProjectStoc.com. 10 2014. 2014. 10 2014 <https://projectstoc.com/read/3498/design-and-fabrication-of-a-mechanism-for-opening-and-closing-of-high-window-of-a-church-7593>.
"Design And Fabrication Of A Mechanism For Opening And Closing Of High Window Of A Church.." ProjectStoc.com. ProjectStoc.com, 10 2014. Web. 10 2014. <https://projectstoc.com/read/3498/design-and-fabrication-of-a-mechanism-for-opening-and-closing-of-high-window-of-a-church-7593>.
"Design And Fabrication Of A Mechanism For Opening And Closing Of High Window Of A Church.." ProjectStoc.com. 10, 2014. Accessed 10, 2014. https://projectstoc.com/read/3498/design-and-fabrication-of-a-mechanism-for-opening-and-closing-of-high-window-of-a-church-7593.
- Related Works
- Design And Fabrication Of Ceiling Fan Blade
- Design And Construction Of Voltage Inverter System With Trickle Charging System
- Design And Construction Of A Motorised Wheel Barrow
- Design And Fabrication Of Creep Material Testing Equipment
- Construction Of A Standard Drawing Desk
- Design And Construction Of Electric Blower For Forge Or Furnace
- Selection Of Water Pumps
- Power Amplifier34
- Fabrication Of A Polythiene Bag Sealing And Cutting Machine
- M Design And Fabrication Of Mobile Deep Freezer