ABSTRACT
The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.
The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a 3 HP electric motor, chemically reacting reagents such as water, calcium carbonate, etc to produce the desired product which is aim to be used as coat for Mechanical Agricultural and Civil structures.
The project research exposes to students and entrepreneur to total knowledge necessary for the production of emulsion and texcoat using a single mixer irrespective of the volume of production. Self help project is the only sustainable solution to the problem of unemployment. Many unemployed youth can lay their hiring. The project research is a modest presentation of simplified facts on the for entrepreneur success at a low coat.
TABLE OF CONTENTS
Title page
Letter of transmittal
Authority page
Certification
Dedication
Acknowledgement
Abstract
Table of contents
CHAPTER ONE
Introduction
Objectives of the research work
Uses and economics
Importance of study
Benefits of the project
CHAPTER TWO
Literature review
Historical
Design of mixing machine
Recognition of need
Definition of problem
Planning for production
Planning for use
Process of design
Factors that determine choice of material
Packaging of product (ames paint)
CHAPTER THREE
Design of machine/sequence of operation
Design and construction details
Design factors/construction of the principles
Construction procedures
CHAPTER FOUR
Paint production
Latex paint
White wash
Paint composition
Paint constituents for emulsion
Quality control
Chalking, abrasion, hardness & adherence
Formation of emulsion paint 20 litres
Formation of texcoat (20 litres)
CHAPTER FIVE
Characteristics of the project
Performance of the project
Conclusion
Recommendation
References
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2012, 11). Design And Fabrication Of A Pilot Production Plant For Paints (emulsion And Texcoat).. ProjectStoc.com. Retrieved 11, 2012, from https://projectstoc.com/read/447/design-and-fabrication-of-a-pilot-production-plant-for-paints-emulsion-and-texcoat
"Design And Fabrication Of A Pilot Production Plant For Paints (emulsion And Texcoat)." ProjectStoc.com. 11 2012. 2012. 11 2012 <https://projectstoc.com/read/447/design-and-fabrication-of-a-pilot-production-plant-for-paints-emulsion-and-texcoat>.
"Design And Fabrication Of A Pilot Production Plant For Paints (emulsion And Texcoat).." ProjectStoc.com. ProjectStoc.com, 11 2012. Web. 11 2012. <https://projectstoc.com/read/447/design-and-fabrication-of-a-pilot-production-plant-for-paints-emulsion-and-texcoat>.
"Design And Fabrication Of A Pilot Production Plant For Paints (emulsion And Texcoat).." ProjectStoc.com. 11, 2012. Accessed 11, 2012. https://projectstoc.com/read/447/design-and-fabrication-of-a-pilot-production-plant-for-paints-emulsion-and-texcoat.
- Related Works
- Power Amplifier34
- Machine Component Design
- Repair Of A Faulty Refrigerator In The Mechanical Engineering Department Of The Institute Of Management And Technology, Enugu
- The Design And Fabrication Of Pressurized Kerosene Stove
- Advanced Fine Finishing Process
- The Design And Fabrication Of An Electric Popcorn Frying Machine
- Design And Fabrication Of A Dust Extractor
- Automatic Temperature Control In Vacuum Brazing Furnace Using P.l.c
- Design And Fabrication Of An Ice Block Making Machine
- Repair And Rehabilitation Of A Faulty Air- Conditioner In Engr. Ayogu And Okpe’s Office At Institute Of Management And Technology (imt) Enugu