ABSTRACT
In the mechanical engineering department of institute of management and technology there are many machines but it is not all that is functioning well.
This may airless as a result of lack of maintenance which is a prove in the breakdown of the air conditioner.
The quality and effectiveness of materials were mated very well as referred to machine maintenance.
The cost of maintenance was minimized jet reaching a highly victorious rehabilitation.
In the course of rehabilitation and repair of a faulty air conditioner, suitable tools such as manifold gauge, refrigerant cost and quality of equipment were put into consideration.
In the mechanical engineering department of institute of management and technology there are many machines but it is not all that is functioning well.
This may airless as a result of lack of maintenance which is a prove in the breakdown of the air conditioner.
The quality and effectiveness of materials were mated very well as referred to machine maintenance.
The cost of maintenance was minimized jet reaching a highly victorious rehabilitation.
In the course of rehabilitation and repair of a faulty air conditioner, suitable tools such as manifold gauge, refrigerant cost and quality of equipment were put into consideration.
TABLE OF CONTENTS
Title page
Letter of transmittal
Approval page
Dedication
Acknowledgement
Abstracts
Table of contents
CHAPTER ONE
1.0 Introduction
1.1 Literature Review
CHAPTER TWO
2.0 The Air Conditioning Cycle Analysis
2.1 Air Conditioning Maintenance
2.2 Repairs and Preparation
2.3 Detection of Faults and Repairs
2.4 Perceptional Measure
2.5 Air Conditioner Operation Principles
2.6 Application of Air Conditioner
2.7 The Component Parts in Air Conditioner
2.8 Sequence of Operation
2.9 The Cost Analysis
CHAPTER THREE
Conclusion
3.1 Recommendation
3.2 References
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 11). Repair And Rehabilitation Of A Faulty Air Conditioner In The Mechanical Engineering Department At The Institute Of Management And Technology (i.m.t.), Enugu.. ProjectStoc.com. Retrieved 11, 2014, from https://projectstoc.com/read/5186/repair-and-rehabilitation-of-a-faulty-air-conditioner-in-the-mechanical-engineering-department-at-the-institute-of-management-and-technology-i-m-t-enugu-8460
"Repair And Rehabilitation Of A Faulty Air Conditioner In The Mechanical Engineering Department At The Institute Of Management And Technology (i.m.t.), Enugu." ProjectStoc.com. 11 2014. 2014. 11 2014 <https://projectstoc.com/read/5186/repair-and-rehabilitation-of-a-faulty-air-conditioner-in-the-mechanical-engineering-department-at-the-institute-of-management-and-technology-i-m-t-enugu-8460>.
"Repair And Rehabilitation Of A Faulty Air Conditioner In The Mechanical Engineering Department At The Institute Of Management And Technology (i.m.t.), Enugu.." ProjectStoc.com. ProjectStoc.com, 11 2014. Web. 11 2014. <https://projectstoc.com/read/5186/repair-and-rehabilitation-of-a-faulty-air-conditioner-in-the-mechanical-engineering-department-at-the-institute-of-management-and-technology-i-m-t-enugu-8460>.
"Repair And Rehabilitation Of A Faulty Air Conditioner In The Mechanical Engineering Department At The Institute Of Management And Technology (i.m.t.), Enugu.." ProjectStoc.com. 11, 2014. Accessed 11, 2014. https://projectstoc.com/read/5186/repair-and-rehabilitation-of-a-faulty-air-conditioner-in-the-mechanical-engineering-department-at-the-institute-of-management-and-technology-i-m-t-enugu-8460.
- Related Works
- Design And Fabrication Of 80cm X 70cm X 50cm Mobile Deep Freezer
- Design And Performance Evaluation Of An Ice Block Making Machine
- Design And Implementation Of An Automated Motor Vehicle Driver’s Licensing System. (a Case Study Of Enugu Motor License Office, Enugu State; Abakpa) Nike).
- The Design And Fabrication Of A Iron Shelling Machine
- Construction Of A Screw Conveyor With A Single Phase Electric Motor
- Report On Construction Of Nylon Sealing And Cutting Machine
- Bench Shaping Machine
- Selection Of Water Pumps
- Construction Of Propeller Agitator
- Construction Of Sheel And Tube Heat Exchanger