Design And Fabrication Of A Dust Extractor

ProjectStoc - 39 pages 4241 views Project Diploma/Degree/Masters Level Mechanical Engineering ₦3000 Naira ($7.89 USD)

This is a Premium work, paid access only

Register/Login to Access Full Work

Man’s impact on global environment system especially in the area of dust extraction is now at a scale where it is disrupting.  These dust extractors varies in major ways.
The environmental degradation is, in turn contributing to health threat in this part of the globe.  Unfortunately most factories, workshops which suppose to posses these machines for dust extractions a re not having them thereby making dust a very dangerous threat to man.  
Due to this ugly development it, is obvious that these factories and workshops can do little or nothing to protect our environment from this poor state.  It is therefore necessary that all and sundry should join the crusade of eradicating dust from our environment thereby making it clean.  Although before now people have tried to contribute their own quota in seeing to the end of the menace, get lack of interest, finance has posed a hindrance to the realization of this achievement.
In view of the above, we deemed it necessary that such a machine should be constructed to the Mechanical Engineering workshop to eradicate dust and thereby make the workshop environment clean and fit for students practical activities. 
 The realization of this work started from our supervisor who conceived the idea which we saw as a need, then we defined the need and synthesized it, evaluate and came to a conclusion.
The synthesis led us to drawing board by sketching and drawing to scale after which the design required was chosen.  Fabricated and parts put together to form what we called a dust extractor.


Title page
Approval page
Letter of transmittal
Signature page
Letter of release
Table of contents

1.0 Introduction 
1.1 Aims and objectives
1.2 Economic importance of a dust extractor
1.3 Uses of extractors (dust)
1.4 Design consideration

2.0 Literature review
2.1 Improvement in previous ones

3.0 Design calculation
3.1 Material selection
3.2 Sequence of operation

4.0 Cost analysis
4.1 Material cost
4.2 Labour cost
4.3 Cost of reporting
4.4 Market survey and value

5.0 Performance evaluation
5.1 Recommendation and conclusion 
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes


(2012, 11). Design And Fabrication Of A Dust Extractor.. Retrieved 11, 2012, from
"Design And Fabrication Of A Dust Extractor." 11 2012. 2012. 11 2012 <>.
"Design And Fabrication Of A Dust Extractor..", 11 2012. Web. 11 2012. <>.
"Design And Fabrication Of A Dust Extractor.." 11, 2012. Accessed 11, 2012.

Connect with Us