Construction Of Flow Nozzle

ProjectStoc - 45 pages 2234 views Project Diploma/Degree/Masters Level Mechanical Engineering ₦4500 Naira ($30 USD)

This is a Premium work, paid access only

Register/Login to Access Full Work

ABSTRACT

The project title “fabrication of flow nozzle” was done by a selected group of Engineering Students and the practiced objective (aim) of the project was centered on constructing a nozzle that is capable of transporting fluid from one to the other, to determine the charge in velocity of the moving fluid across two given areas of the nozzle and to be able to measure the quantity of fluid that will flow through the nozzle for a given period of time.
However, the construction of the nozzle was done with materials obtainable locally and the science of operation carried out in constructing the nozzle was; cleaning, marking out, cutting off, drilling, folding, centre punching, assembling, welding, filling, testing and painting. 
The flow nozzle was constructed based on the following specifications and dimensions;
Throat Diameter60mm
The diameter of the duct pipe 140mm
The length of the up stream pipe 200mm
The thickness of the nozzle3.8mm
The length of the down stream pipe 200mm
The height of the nozzle820mm
The length of the nozzle690mm
The size of the pressure valves½ inch
Furthermore, the selection of materials for the construction of this flow nozzle was based on the factors which includes; ductility, malleability, fabricability, mechanical strength and stability, availability, corrosion resistance and lastly cost factor.
Finally, the constructed flow nozzle and all other expenses cost N8,000.


TABLE OF CONTENTS

Title page
Approval page
Letter of transmittal
Dedication
Acknowledgement 
Table of contents
Abstract

CHAPTER ONE
1.0Introduction
1.1Definition of flow nozzle
1.2History of metering devices
1.3The scope of the project

CHAPTER TWO
2.0Literature review
2.1Theory of flow nozzle
2.2The characteristics of the nozzle
2.3Types of flow nozzle
2.4Advantages of flow nozzle
2.5Disadvantages of flow nozzle
2.6The uses of flow nozzle

CHAPTER THREE
3.0The method of construction

CHAPTER FOUR
4.0The Method Of Construction

CHAPTER FIVE
5.0Discussion
5.1Costing analysis

CHAPTER SIX
5.0Conclusion

CHAPTER SEVEN
7.0Recommendation
References
Nomenclature
Appendices

Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes

CITE THIS WORK

(2012, 12). Construction Of Flow Nozzle.. Afribary.com. Retrieved 12, 2012, from https://afribary.com/read/479/construction-of-flow-nozzle
"Construction Of Flow Nozzle." Afribary.com. 12 2012. 2012. 12 2012 <https://afribary.com/read/479/construction-of-flow-nozzle>.
"Construction Of Flow Nozzle.." Afribary.com. Afribary.com, 12 2012. Web. 12 2012. <https://afribary.com/read/479/construction-of-flow-nozzle>.
"Construction Of Flow Nozzle.." Afribary.com. 12, 2012. Accessed 12, 2012. https://afribary.com/read/479/construction-of-flow-nozzle.

Connect with Us