ABSTRACT
This Machine is design and fabricate as a prerequisite for the award of a Higher National Diploma.
We sketch different designs which after consideration of many factors like the machine efficiency, the cost of materials e.t.c before we finally embark on this machine.The machine major component are the shaft, the inner barrel, the outer barrel, the conveyor, the tray etc.The machine is build with very strong and well selected materials which enhances the performance of the machine. The machine efficiency is above 80% but less than 100%. The output of the machine is above average so it satisfies the purpose of which it is design.
LIST OF ILLUSTRATION
(1) Introduction.
(2) Literature Review.
(3) Material Selection.
(4) The Shelling Unit.
(5) The construction and Design method.
TABLE OF CONTENT
COVER PAGE
RELEASE PAGE
LETTER OF TRANSMITTAL
SIGNATURE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGMENT
ABSTRACT
LIST OF ILLUSTRATION
TABLE OF CONTENT
CHAPTER ONE
INTRODUCTION
CHAPTER TWO
LITERATURE REVIEW
2.1 Hand Shelling Method
2.2 Direct Linkage Method and its Limitation
2.3 Refined Design Method and its Specification
CHAPTER THREE
SHELLING UNIT AND DESIGN CALCULATION
3.1 The Frame
3.2 Spinning Shaft Design
3.3 Shaft Analysis
3.4 Belt Drive
CHAPTER FOUR
MATERIAL SELECTION
4.1 Materials Selection and Design Of Shaft
4.2 Selection and Location Of Bearing
4.3 Electric Motor Selection
4.4 Selection of Pulley Material
CHAPTER FIVE
CONSTRUCTION AND DESIGN METHOD
5.1 The Shaft
5.2 Metal Tray
5.3 Shelling Unit
5.4 Outlet
5.5 Barrel
5.6 The Perforated Metal Sheet
5.7 Sequence Of Assembly
5.8 Operation Of Corn Shelling Machine
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2015, 10). The Design And Fabrication Of A Corn Selling Machine.. ProjectStoc.com. Retrieved 10, 2015, from https://projectstoc.com/read/6581/the-design-and-fabrication-of-a-corn-selling-machine-2552
"The Design And Fabrication Of A Corn Selling Machine." ProjectStoc.com. 10 2015. 2015. 10 2015 <https://projectstoc.com/read/6581/the-design-and-fabrication-of-a-corn-selling-machine-2552>.
"The Design And Fabrication Of A Corn Selling Machine.." ProjectStoc.com. ProjectStoc.com, 10 2015. Web. 10 2015. <https://projectstoc.com/read/6581/the-design-and-fabrication-of-a-corn-selling-machine-2552>.
"The Design And Fabrication Of A Corn Selling Machine.." ProjectStoc.com. 10, 2015. Accessed 10, 2015. https://projectstoc.com/read/6581/the-design-and-fabrication-of-a-corn-selling-machine-2552.
- Related Works
- Fabrication Of A Polythiene Bag Sealing And Cutting Machine
- Selection Of Water Pumps
- Fabrication Of A Standard Wheelbarrow
- Design And Fabrication Of An Air Compressed Engine
- Fabrication Of The A Metallic Bookshelf
- A Termpaper On Stress Concentration
- Construction Of Industrial Barrow
- Automobile Motor Vehicle Construction
- Construction Of Industrial Wheel Barrow
- Repair And Fabrication Of A Refrigerator System