ABSTRACT
In the society at large Technology is fast replacing the crude method of carrying out work and has been making room for employment. Besides, it has also caught the attention of the youths who will prefer to work in a company with technological operations than one with man-power operations. This project can be used to convey materials ranging from those in powdery forms grit forms, and stones in the size of crushed granites. If applied to the foundry technology practical (sand mould) under gone by the department. The lecture will experience ease in carrying out his lecture as well as satisfaction since there would not be lack of sand as this can be seen to, by an attendant and the lectures will have all the student of the Department in attendance.
TABLE OF CONTENT
Title page ii
Little of transmittal iii
Release iv
Signature v
Approval vi
Dedication vii
Acknowledgement viii
Table of content ix
Abstract xi
CHAPTER ONE
1.1 Introductions 1
1.2 Description of the screw conveyor 2
CHAPTER TWO
2.1 Mode of operation 4
2.2 Material selections 6
CHAPTER THREE
3.1 design 7
3.2 design analysis 7
3.3 principle of operation 9
3.4 capacity of the screw conveyor 10
3.5 sequence of operation/ construction 11
CHAPTER FOUR
4.1 assembling of the conveyor 37
4.2 cost analysis 38
CHAPTER FIVE
5.1 conclusions 41
5.2 recommendations 41
5.3 references 42
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 10). Construction Of A Screw Conveyor With A Single Phase Electric Motor.. ProjectStoc.com. Retrieved 10, 2014, from https://projectstoc.com/read/3816/construction-of-a-screw-conveyor-with-a-single-phase-electric-motor-6688
"Construction Of A Screw Conveyor With A Single Phase Electric Motor." ProjectStoc.com. 10 2014. 2014. 10 2014 <https://projectstoc.com/read/3816/construction-of-a-screw-conveyor-with-a-single-phase-electric-motor-6688>.
"Construction Of A Screw Conveyor With A Single Phase Electric Motor.." ProjectStoc.com. ProjectStoc.com, 10 2014. Web. 10 2014. <https://projectstoc.com/read/3816/construction-of-a-screw-conveyor-with-a-single-phase-electric-motor-6688>.
"Construction Of A Screw Conveyor With A Single Phase Electric Motor.." ProjectStoc.com. 10, 2014. Accessed 10, 2014. https://projectstoc.com/read/3816/construction-of-a-screw-conveyor-with-a-single-phase-electric-motor-6688.
- Related Works
- Construction Of Packed Distillation Column
- Design And Performance Evaluation Of An Ice Block Making Machine
- Design And Implementation Of Computerized Budget Analysis System (case Study Of Enugu State Ministry Of Finance)
- The Design And Fabrication Of A Pressurized Kerosene Oven (60 X 90)
- Construction Of A Model Shell And Tube Heat Exchanger
- Construction Of Industrial Wheel Barrow
- Design And Construction Of A Motorised Wheel Barrow
- The Fabrication Of A Single Face Pressurized Kerosene Cooker
- Design And Construction Of A Metallic Book Shelf
- Thermodynamic Principle Of Energy Conversion