ABSTRACT
This write up outlines the design and fabrication of wood lathe machine. This type of lathe is capable of creating different wood designs using the cheapest available material and method.
To achieve functional and efficient wood lathe of this kind, we analyzed as well as synthesized the different possible design solutions and concepts.
The principle of turner is puts into consideration the case of its production, main finance and services, values durability , reliability and appearance of the machine.
Finally, the parts were assembled and the machine test run. To ensure the achievement of best performance, iterative procedures were carried out. The material, labour and overhead costs were determined to get the production cost of a prototype.
TABLE OF CONTENTS
Title page
Certification
Dedication
Acknowledgement
Abstract
Table of contents.
Chapter One
1.0 Introduction
1.1 Objectives
1.2 Literature Review
1.3 Trend
1.4 Statement of Problem
1.5 Purpose of Study
1.6 Scope of Work
Chapter Two
2.0 Synthesis
2.1 Theory of Design
2.2 Materials Selection
2.3 Analysis
2.4 Resolution of Forces
2.5 Reaction, Force and Moment Digrams
2.6 Maximum Shear and Bending Stresses
Chapter Three
3.0 Assembly Procedure
3.1 Testing and Evaluation
3.2 Operational /Safety Guide
3.3 General Maintenance
Chapter Four
4.0 Cost Analysis
4.1 Material Cost
4.2 Labour Cost
4.3 Overhead Cost
4.4 Summary of Costs
Chapter Five
5.0 Conclusion
51. Recommendations
52. References
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 12). Design And Fabrication Of Wood Lathe Machine.. ProjectStoc.com. Retrieved 12, 2014, from https://projectstoc.com/read/5579/design-and-fabrication-of-wood-lathe-machine-4479
"Design And Fabrication Of Wood Lathe Machine." ProjectStoc.com. 12 2014. 2014. 12 2014 <https://projectstoc.com/read/5579/design-and-fabrication-of-wood-lathe-machine-4479>.
"Design And Fabrication Of Wood Lathe Machine.." ProjectStoc.com. ProjectStoc.com, 12 2014. Web. 12 2014. <https://projectstoc.com/read/5579/design-and-fabrication-of-wood-lathe-machine-4479>.
"Design And Fabrication Of Wood Lathe Machine.." ProjectStoc.com. 12, 2014. Accessed 12, 2014. https://projectstoc.com/read/5579/design-and-fabrication-of-wood-lathe-machine-4479.
- Related Works
- Design And Construction Of Motorised Wheel Barrow
- The Fabrication Of A Single Face Pressurized Kerosene Cooker
- The Design And Fabrication Of A Corn Selling Machine
- Repair Of A Faulty Refrigerator In The Mechanical Engineering Department Of The Institute Of Management And Technology, Enugu
- Construction Of A Potable Electric Operated With Radio Control (wireless Remote) Motor Vehicle For Long Valve Bus
- Evaluating The Different Methods Of Corrosion Prevention, Control And Monitoring
- Fabrication Of Metal Shelf
- Construction Of Book Shelve
- Construction Of Packed Distillation Column
- Construction Of Steel Cupboard