ABSTRACT
This work is aimed at the removal of hazardous gases and dust particles, air channeling etc. This work is aimed at achieving industrial waste control therein safe – guarding the immediate environment.
Chapter one accounts for the introduction of the project. Chapter two involves literature review in the origin, types and alternative device is compared. Chapter three discussed the design analysis of the project. In chapter four, the sequence of operation and material selection for the construction of the project were discussed. In chapter five, the average cost of material, labor and other attached costs were analysed and the total sum was ascertained. In chapter six, the project was tested for functionality and its performance was satisfactory and then recommendations for alternations in future and applications and a final conclusion was the last section.
TABLE OF CONTENTS
Title Page
Approval Page
Dedication
Acknowledgement
Abstract
Table of Contents
Table of Illustrations
CHAPTER 1: INTRODUCTION
CHAPTER 2: LITERATURE REVIEW
2.1 Origin of Fans
2.2 Types of Fans
2.3 Blowers
2.3.1 Definition and Capacity of Blowers
2.3.2 Operating Principles for Blowers
2.3.3 Applications of Blowers
2.3.4 Advantages of Blowers
2.3.5 Material Selection for Blowers
2.4 Types of Blowers
CHAPTER 3: DESIGN OF INDUSTRIAL FAN
3.1 Basics of Lift and Drag
3.1.1 Conventions for Lift and Drag Forces
3.1.2 Forces on a Flat Surface
3.1.3 Forces on a Curved Surface
3.2 Kinematics of the Blade
3.3 Blade – Fluid Interaction
3.4 CD and CL as Functions of Angle of Attack
CHAPTER FOUR: MATERIAL SELECTION AND SEQUENCE OF OPERATION
4.1 Material Selection
4.2 Sequence of Operation
CHAPTER FIVE: COST ANALYSIS
5.1 Material Cost
5.2 Direct Labour Cost
5.3 Overhead Cost
CHAPTER SIX: PERFORMANCE EVALUATION, RECOMMENDATIONS AND CONCLUSIONS
6.1 Performance Evaluation
6.2 Recommendation
6.3 Conclusions
References
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 12). The Construction Of Industrial Fan For Workshop Use.. ProjectStoc.com. Retrieved 12, 2014, from https://projectstoc.com/read/5712/the-construction-of-industrial-fan-for-workshop-use-625
"The Construction Of Industrial Fan For Workshop Use." ProjectStoc.com. 12 2014. 2014. 12 2014 <https://projectstoc.com/read/5712/the-construction-of-industrial-fan-for-workshop-use-625>.
"The Construction Of Industrial Fan For Workshop Use.." ProjectStoc.com. ProjectStoc.com, 12 2014. Web. 12 2014. <https://projectstoc.com/read/5712/the-construction-of-industrial-fan-for-workshop-use-625>.
"The Construction Of Industrial Fan For Workshop Use.." ProjectStoc.com. 12, 2014. Accessed 12, 2014. https://projectstoc.com/read/5712/the-construction-of-industrial-fan-for-workshop-use-625.
- Related Works
- Fabrication Of A Standard Wheelbarrow
- The Design And Cosntruction Of 1000kwa Stabilizer A Project Presented To The Department Of Electrical/electronics Engineering
- The Design And Fabrication Of An Electric Popcorn Frying Machine
- Repair And Fabrication Of A Refrigerator System
- Basic Refrigeration & Air Conditioning Technology
- Car Expert System
- Design And Implementation Of Computerized Budget Analysis System (case Study Of Enugu State Ministry Of Finance)
- Design And Construction Of A Car Door Using Fibre Reinforced Plastic Composite
- A Termpaper On Stress Concentration
- Engineering Drawing In Terms Of Communication