ABSTRACT
This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes.
It also comprises of materials as follows: Mechanical and Electrical section
Mechanical section include the frame structure, lever and the pedal mechanism.
Electrical section include the transformer, Regular and the micro switch.
TABLE OF CONTENTS
Title Page
Letter of Transmittal
Release of Page
Approval Page
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE
1.1 Introduction
CHAPTER TWO
2.0 Literature Review
2.1 Material for Fabrication and their Properties
2.2 Description of a Simple Polythene Sealing and Cutting Machine
2.3 Selection of the Fabrication Materials
CHAPTER THREE
3.0 Tools for Fabrication
3.1 Fabrication Specification
3.2 Sequence of Operation
CHAPTER FOUR
4.0 Cost of Production/Cost Analysis
4.1 Cost of Material
4.2 Labour / Cost
4.3 Machine Cost / Tools Cost
4.4 Transportation
4.5 Total Cost
CHAPTER FIVE
5.0 Safety Precautions
5.1 Maintenance of the Machine
CHAPTER SIX
6.0 Discussion
6.1 Conclusion
6.2 Recommendation
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2012, 11). Fabrication Of A Polythiene Bag Sealing And Cutting Machine.. ProjectStoc.com. Retrieved 11, 2012, from https://projectstoc.com/read/443/fabrication-of-a-polythiene-bag-sealing-and-cutting-machine
"Fabrication Of A Polythiene Bag Sealing And Cutting Machine." ProjectStoc.com. 11 2012. 2012. 11 2012 <https://projectstoc.com/read/443/fabrication-of-a-polythiene-bag-sealing-and-cutting-machine>.
"Fabrication Of A Polythiene Bag Sealing And Cutting Machine.." ProjectStoc.com. ProjectStoc.com, 11 2012. Web. 11 2012. <https://projectstoc.com/read/443/fabrication-of-a-polythiene-bag-sealing-and-cutting-machine>.
"Fabrication Of A Polythiene Bag Sealing And Cutting Machine.." ProjectStoc.com. 11, 2012. Accessed 11, 2012. https://projectstoc.com/read/443/fabrication-of-a-polythiene-bag-sealing-and-cutting-machine.
- Related Works
- Design And Construction Of Motorised Wheel Barrow
- Design And Construction Of Metallic Bookshelf
- Design And Construction Of A Single Phase Auto-transformer Of Rating Ikva, 240v/110, 80 12v, 6v
- Design And Fabrication Of A Dust Extractor
- Repair And Rehabilitation Of A Faulty Deep Freezer
- Automobile Motor Vehicle Construction
- Machine Component Design
- A Termpaper On Stress Concentration
- Fabrication Of The A Metallic Bookshelf
- Design And Implementation Of Computerized Stock Stock Marketing Report Report (a Case Study Of Nigeria Stock Exchanhe Commission)