This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population. This machine was designed after due consideration of its ease of production, maintenance and servicing.
Chapter one gives account of the introductory background of the project. Chapter two was the literature review of the project. Chapter three was the synthesis of solution under which different alternatives, comparison of alternatives and choice were discussed. In chapter four, effort was made to discuss the Analysis and Theory of design. The details of construction, Maintenance, Procedures and testing and evaluation were discussed, In chapter five. After the testing, it was found to perform effectively and efficiently. Chapter six became the home for Material evaluation, machine and labour cost analysis. Finally was chapter seven, where we based our discussion on the project, possible recommendations and conclusion.
TABLE OF CONTENTS
Table of contents
CHAPTER ONE â€“ INTRODUCTION
1.1 Identification of Needs
1.2 Purpose of Construction
1.3 Importance and Specification of the project
CHAPTER TWO â€“ LITERATURE REVIEW
2.1 History about the project
2.2 Introduction of the project
CHAPTER THREE â€“ SYNTHESIS OF SOLUTION
3.1 Different Alternative
3.2 Comparison of Alternatives and Choice
CHAPTER FOUR â€“ THEORY OF DESIGN AND ANALYSIS
4.1 Theory of Design
4.2 Analysis of Design
CHAPTER FIVE â€“ CONSTRUCTION/MAINTENANCE PROCEDURES
5.1 Material Selection
5.2 Production Processes â€“Workshop Operational Sequences
5.3 Machining of Components
5.4 Assembly Procedures
5.5 Testing and Evaluation
6.1 Material Costing Analysis
6.2 Machine Cost Analysis
6.3 Labour Cost Analysis
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2012, 11). Design And Construction Of A Spin Dryer.. ProjectStoc.com. Retrieved 11, 2012, from https://projectstoc.com/read/448/design-and-construction-of-a-spin-dryer
"Design And Construction Of A Spin Dryer." ProjectStoc.com. 11 2012. 2012. 11 2012 <https://projectstoc.com/read/448/design-and-construction-of-a-spin-dryer>.
"Design And Construction Of A Spin Dryer.." ProjectStoc.com. ProjectStoc.com, 11 2012. Web. 11 2012. <https://projectstoc.com/read/448/design-and-construction-of-a-spin-dryer>.
"Design And Construction Of A Spin Dryer.." ProjectStoc.com. 11, 2012. Accessed 11, 2012. https://projectstoc.com/read/448/design-and-construction-of-a-spin-dryer.
- Related Works
- Parametric Performance Evaluation Of A Window Unit Air-conditioner And Its Maintenance
- Selection Of Water Pumps
- Repair And Rehabilitation Of A Faculty Refrigerator
- Design And Implementation Of Simple Scientific Calculator.
- Construction Of Book Shelve
- Repair And Rehabilitation Of A Faulty Air Conditioner
- Design And Construction Of A 2000w Inverter
- Design And Implementation Of Computerized Stock Stock Marketing Report Report (a Case Study Of Nigeria Stock Exchanhe Commission)
- Repair And Rehabilitation Of A Faulty Air- Conditioner In Engr. Ayogu And Okpe’s Office At Institute Of Management And Technology (imt) Enugu
- The Fabrication Of A Single Face Pressurized Kerosene Cooker