ABSTRACT
This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces.
What is taken into consideration in this project are the cost of its production, processes, and maintenance.
Other considerable factors are the functional aspect of the plant/equipment and its durability as well as the reliability. Portability, stability and the physical appearance of the entire equipment.
TABLE OF CONTENTS
Title page
Approval page
Letter of transmittal
Signature page
Release page
Acknowledgement
Dedication
Abstract
Table of contents
CHAPTER ONE
1.0 introduction
1.1 description of the metal bookshelf
1.2 purpose of the project
1.3 aims of the project
CHAPTER TWO
2.0 Design analysis
2.1 Definitions of terms
2.2 Basic mathematical expression for calculation
2.3 Capacity of bookshelf
CHAPTER THREE
3.0 Material selections
3.1 Tools /equipment
3.2 Construction
3.3. Sequence of construction of the various parts
CHAPTER FOUR
4.0 Cost analysis
4.1 Purpose of cost estimating
CHAPTER FIVE
5.0 Maintenance guideline
5.1 Recommendation
5.2 Conclusions
Reference
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2013, 02). Design And Construction Of A Metallic Book Shelf.. ProjectStoc.com. Retrieved 02, 2013, from https://projectstoc.com/read/920/design-and-construction-of-a-metallic-book-shelf
"Design And Construction Of A Metallic Book Shelf." ProjectStoc.com. 02 2013. 2013. 02 2013 <https://projectstoc.com/read/920/design-and-construction-of-a-metallic-book-shelf>.
"Design And Construction Of A Metallic Book Shelf.." ProjectStoc.com. ProjectStoc.com, 02 2013. Web. 02 2013. <https://projectstoc.com/read/920/design-and-construction-of-a-metallic-book-shelf>.
"Design And Construction Of A Metallic Book Shelf.." ProjectStoc.com. 02, 2013. Accessed 02, 2013. https://projectstoc.com/read/920/design-and-construction-of-a-metallic-book-shelf.
- Related Works
- Bench Shaping Machine
- Project Repair And Fabrication Of A Refrigerator System
- Design And Construction Of Motorised Wheel Barrow
- Design And Fabrication Of A Mechanism For Opening And Closing Of High Window Of A Church
- Design And Implementation Of Computerized Stock Stock Marketing Report Report (a Case Study Of Nigeria Stock Exchanhe Commission)
- Repair Of A Faulty Refrigerator In The Mechanical Engineering Department Of The Institute Of Management And Technology, Enugu
- Repair And Rehabilitation Of A Faculty Refrigerator
- Design And Fabrication Of A Pilot Production Plant For Paints (emulsion And Texcoat)
- Fabrication Of The A Metallic Bookshelf
- Automatic Temperature Control In Vacuum Brazing Furnace Using P.l.c