ABSTRACT
This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally.
The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component. The sealing and cutting filament, the transformer with 1000 turns of wire for the secondary and about 1200 turns for the primary.
Others includes the micro switch, telephone tape and aluminum sheet casing.
The machine has high performance and efficiency with reasonable degree of accuracy.
In the fabrication of the machine aluminum sheet were marked and cut to size. The aluminum is placed to protect it from external stress and damage. The filament element and the micro switch converts electrical energy to heat energy. The total cost of the fabrication is N4020 with exclusion of other cost.
TABLE OF CONTENT
Title Page
Letter of Transmittal
Statement of Fact
Abstract
Dedication
Acknowledgement
Table of content
CHAPTER ONE
1.0 Introduction
1.1 Uses of Polythene/Nylon
CHAPTER TWO
2.0 Literature Review
2.1 Theory of Sealing
2.2 Sealing of Cellophane
2.3 Types of Sealing
2.4 Mode of Operation of the Machine
CHAPTER THREE
3.0 Constructional Procedure
3.1 Cost Estimation
3.2 Recommendation
CHAPTER FOUR
4.0 Maintenance of the Machine
4.1 Conclusion
4.2 Reference
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2013, 02). Report On Construction Of Nylon Sealing And Cutting Machine.. ProjectStoc.com. Retrieved 02, 2013, from https://projectstoc.com/read/927/report-on-construction-of-nylon-sealing-and-cutting-machine
"Report On Construction Of Nylon Sealing And Cutting Machine." ProjectStoc.com. 02 2013. 2013. 02 2013 <https://projectstoc.com/read/927/report-on-construction-of-nylon-sealing-and-cutting-machine>.
"Report On Construction Of Nylon Sealing And Cutting Machine.." ProjectStoc.com. ProjectStoc.com, 02 2013. Web. 02 2013. <https://projectstoc.com/read/927/report-on-construction-of-nylon-sealing-and-cutting-machine>.
"Report On Construction Of Nylon Sealing And Cutting Machine.." ProjectStoc.com. 02, 2013. Accessed 02, 2013. https://projectstoc.com/read/927/report-on-construction-of-nylon-sealing-and-cutting-machine.
- Related Works
- Design And Implementation Of Computerized Budget Analysis System (case Study Of Enugu State Ministry Of Finance)
- A Termpaper On Types, And Design Of Brakes
- M Design And Fabrication Of Mobile Deep Freezer
- Repair Of Stop Clocks
- Construction Of Flow Nozzle
- General Overview Of Renewable Energy
- Construction Of A Mobile Refrigerator
- Design And Construction Of A Metallic Book Shelf
- Repair And Rehabilitation Of A Faulty Air Conditioner
- Students Industrial Work Experience Scheme In Nigeria Railway Corporation Enugu.