A machine for corn Sheller is highly and greatly needed for consistence of usage of corn in local and international levels.
With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.
In attainment to this design objective and aims, a proper considerations was given to the machinability factor which includes, installation, simplication, durability, choice material operational efficiently serviceability of the masculine low costing and prolonged life span when operates with utilization with minimal down fine
The design details are given includes such items as materials and their characteristics. Adaptation methodology the parts relation with the whole device and the effect of the finished product upon which an inquisitive mind can make collection of fact in future which related to this project.
TABLE OF CONTENT
Letter of transmittal
List of illustration
List of symbol
Table of contents
1.1Purpose of construction
1.2Importance and specification of the project
2.1Hand shelling method
2.2Direct linkages and its limitation
2.3Refined Design and its specification
3.1Material selection and Design of shaft
3.2Selection and location of Bearing
3.3Electric Motor Selection
3.4Selection Of Pulley Material
The Shelling Unit
4.2The spinning shaft
Construction and Design Method
The shelling Unit
Sequence of Assembly
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2013, 01). The Design And Fabrication Of A Iron Shelling Machine.. Afribary.com. Retrieved 01, 2013, from https://afribary.com/read/638/the-design-and-fabrication-of-a-iron-shelling-machine
"The Design And Fabrication Of A Iron Shelling Machine." Afribary.com. 01 2013. 2013. 01 2013 <https://afribary.com/read/638/the-design-and-fabrication-of-a-iron-shelling-machine>.
"The Design And Fabrication Of A Iron Shelling Machine.." Afribary.com. Afribary.com, 01 2013. Web. 01 2013. <https://afribary.com/read/638/the-design-and-fabrication-of-a-iron-shelling-machine>.
"The Design And Fabrication Of A Iron Shelling Machine.." Afribary.com. 01, 2013. Accessed 01, 2013. https://afribary.com/read/638/the-design-and-fabrication-of-a-iron-shelling-machine.
- Related Works
- Design And Construction Of A Spin Dryer
- Project Repair And Fabrication Of A Refrigerator System
- The Design Of A Modern Railway Station
- Construction Of A Screw Conveyor With A Single Phase Electric Motor
- Construction Of An Intruder Alarm System
- Design Of Melon De-husking And Separation Machine
- Fabrication Of A Standard Wheelbarrow
- Construction Of A Standard Drawing Desk
- Repair And Rehabilitation Of A Faulty Air Conditioner In The Mechanical Engineering Department At The Institute Of Management And Technology (i.m.t.), Enugu
- Bench Shaping Machine