PREFACE
This is the presentation of an information on the detailing of structural members in Buildings. Structural detailing is a branch of structural work that transposes the idea or works f a structural engineer in working drawings for easy utilization in the building Construction works. Working drawing are produced by an architect and a structural Engineer for easy use by a Contractors.
The processes of detailing put in place was in conjunction with the recommendation of the concrete society and the constitute of Structural Engineers. In building construction, a good interaction and relationship between the architects, structural engineer, Quantity conveyors and contractors are required. The methods, scales, symbols and notations must be standardized and understood by all parties involve in a project to minimizes risks and communication hindrance.
A structure is broken down into identifiable elements for detailing work like beams columns, slabs etc which enables the different detailing aspects to be fully addresses and understood.
STRUCTURAL SYMBOLS
The abbreviation recommended for structural detailing works are as follows:
R.C = Reinforced Concrete.
Drg = Drawing
Hor = Horizontal
Vert = Vertical
dia = Diameter
Fdn = Foundation
Cone = Concrete
Col = Column
Types of Reinforcements
R = mild steel bars.
Y = High yield bars
COMMENTS relating to reinforcements
CL = Centre line
B = Bottom
T = Top
e/c = Centre to Centre.
TABLE OF CONTENTS
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
PREFACE
STRUCTURE SYMBOLS
CHAPTERS
1 Introduction
2 Detailing Processes
3 Design Condition, And Summary
4 Reinforced Concrete
5 Engineers Design Specifications
6 Detailing Of The Elements
A Foundation
B Columns
C Beams
D Slab
E Staircase
BIBLIOGRAPHY.
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2015, 10). Structural/reinforcement Detailing Of A Single Story Residential Building.. ProjectStoc.com. Retrieved 10, 2015, from https://projectstoc.com/read/6579/structural-reinforcement-detailing-of-a-single-story-residential-building-4897
"Structural/reinforcement Detailing Of A Single Story Residential Building." ProjectStoc.com. 10 2015. 2015. 10 2015 <https://projectstoc.com/read/6579/structural-reinforcement-detailing-of-a-single-story-residential-building-4897>.
"Structural/reinforcement Detailing Of A Single Story Residential Building.." ProjectStoc.com. ProjectStoc.com, 10 2015. Web. 10 2015. <https://projectstoc.com/read/6579/structural-reinforcement-detailing-of-a-single-story-residential-building-4897>.
"Structural/reinforcement Detailing Of A Single Story Residential Building.." ProjectStoc.com. 10, 2015. Accessed 10, 2015. https://projectstoc.com/read/6579/structural-reinforcement-detailing-of-a-single-story-residential-building-4897.
- Related Works
- Structural Detailing Of A Reinforced Concrete Structure – Duplex
- Comparing The Strenght As Blocks Made From (1) Cement And Lateritic Soil (2) Cement And Red Earth (3) Laterite, Sand And Red Earth
- Structural/reinforcement Detailing Of A Single Storey Residential Building With Retaining Wall
- Analysis And Design Of A Retaining Wall
- Route Survey And Design Of Pavement Of Road Linking Ferderal Secretariate, Industrial Center And Mass Communication I.m.t. Campus Iii Enugu
- Structural Detailing Of Two Storey Building
- Investigation On The Causes Of Pavement Failure Along Hillview Off Esbs Road Enugu
- Route Survey And Pavement Design Of The Road Linking Federal Secretariat And Imt Civil Soil Labouratory And Industrial Center.
- Civilsoft Quickcivil Series
- The Water Drainage Problems (a Case Study Of Imt Campus 3 Enugu)