ABSTRACT
This project is a fabrication of a standard drawing writing desk using the cheapest, effective and most readily available materials. Method of maintenance and services were also taken into consideration.
The functional aspect of the equipment was also given adequate consideration in the project work. Also take into consideration the reliability, portability and general values, appearance of the equipment.
A material used for the construction was of best quality, which have excellent physical and chemical properties. These materials includes the plywood, Aluminum, sheets knots, screws, Black. Bather cover, chemical gum and safety keys.
Finally having used these materials of Best quality to produce a standard drawing desk (equipment). And after being tested was found to be efficient and can be used for private purposes, commercial purposes as well as in companies.
TABLE OF CONTENT
Title page
Approval page
Letter of transmittal
Dedication
Acknowledgement
Abstract
Table of content.
CHAPTER ONE
INTORDUCTION
1.0 Types of drawing desk
1.1 Adjustable drawing desk
1.2 Non adjustable drawing desk
CHAPTER TWO
2.0 Features of adjustable drawing desk
2.1 Materials and function of components
2.2 The desk
2.3 The drawer
2.4 The Stands
CHAPTER THREE
3.0 Design and fabrication selection
3.1 Design methods
3.2 Hierarchy of design
3.3 Projection method
3.4 Fabrication wood usage
3.5 Hard wood
3.6 Ply wood
3.7 Tools used for fabrication
The folding wood rule
The marking guard
Saws
Chisels
Planes
Measuring Tape
CHAPTER FOUR
4.1 Material selection
4.2 Metal joining
4.3 Choice of material
CHAPTER FIVE
5.1 Construction procedure
5.2 Fabrication
5.3 Procedure
5.4 Cost analysis
5.5 Material cost
CHAPTER SIX
6.1 Discussion
6.2 Safety precautions
6.3 Maintenance
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 12). Construction Of A Standard Drawing Desk.. ProjectStoc.com. Retrieved 12, 2014, from https://projectstoc.com/read/5625/construction-of-a-standard-drawing-desk-5869
"Construction Of A Standard Drawing Desk." ProjectStoc.com. 12 2014. 2014. 12 2014 <https://projectstoc.com/read/5625/construction-of-a-standard-drawing-desk-5869>.
"Construction Of A Standard Drawing Desk.." ProjectStoc.com. ProjectStoc.com, 12 2014. Web. 12 2014. <https://projectstoc.com/read/5625/construction-of-a-standard-drawing-desk-5869>.
"Construction Of A Standard Drawing Desk.." ProjectStoc.com. 12, 2014. Accessed 12, 2014. https://projectstoc.com/read/5625/construction-of-a-standard-drawing-desk-5869.
- Related Works
- Design Of Road Pavement Linking Federal Secretariat Industrial Centre And Mass Communication Department (imt Campus Iii) Enugu
- Groundwater Development For Portable Water Supply
- Investigation On The Causes Of Pavement Failure Along Hillview Off Esbs Road Enugu
- The Water Drainage Problems (a Case Study Of Imt Campus 3 Enugu)
- Route Survey And Design Of Pavement Of Road Linking Ferderal Secretariate, Industrial Center And Mass Communication I.m.t. Campus Iii Enugu
- Mechanical Properties Of Concrete
- Effects Of Aggregate Sizes On The Concrete Strength
- Civilsoft Quickcivil Series
- Structural/reinforcement Detailing Of A Single Story Residential Building
- Route Survey And Pavement Design Of The Road Linking Federal Secretariat And Imt Civil Soil Labouratory And Industrial Center.