ABSTRACT
This project involves the development of a console that allows multiple inputs (3 inputs) and a single output to a screen through the use of software.
The micro controller which serves as the ‘heart’ of the hardware was encoded using C programming language. These lines of code enable the micro controller to switch to the selected signal when the remote is pressed or one of the buttons is pushed.
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2015, 08). Micro Controller System For Multi Input Single Output (miso) System.. ProjectStoc.com. Retrieved 08, 2015, from https://projectstoc.com/read/6319/micro-controller-system-for-multi-input-single-output-miso-system-9140
"Micro Controller System For Multi Input Single Output (miso) System." ProjectStoc.com. 08 2015. 2015. 08 2015 <https://projectstoc.com/read/6319/micro-controller-system-for-multi-input-single-output-miso-system-9140>.
"Micro Controller System For Multi Input Single Output (miso) System.." ProjectStoc.com. ProjectStoc.com, 08 2015. Web. 08 2015. <https://projectstoc.com/read/6319/micro-controller-system-for-multi-input-single-output-miso-system-9140>.
"Micro Controller System For Multi Input Single Output (miso) System.." ProjectStoc.com. 08, 2015. Accessed 08, 2015. https://projectstoc.com/read/6319/micro-controller-system-for-multi-input-single-output-miso-system-9140.
- Related Works
- Design And Construction Of Digital Electronics Training System
- Design And Implementation Of A Solar Power System
- Design And Installation Of 200 Watt Solar Power System
- Design And Construction A Simple Light Sensitive Circuit
- Construction Of Automatic Water Level Controller For Both Overhead And Underground Tanks
- Wastes And Sewage As A Source Of Electricity Generation
- Electrical Power Generating Systems Considering Renewable And Non-renewable Energy Sources Nigeria As A Case Study
- Construction Of A 12 Volt Battery Charger
- Microcontroller Based Dot Matrix Advert Display System
- Design And Construction Of Automatic Emergency Light