The Design And Construction Of A 220 / 12 Volts Single Phase Step-down Transformer

This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work. 

I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle of operation, the design and construction procedure. 

Critical analysis of all the functional parts of the transformer and rectifier connected to it. It will therefore, be of great in serest and suitable to all electrical engineers and engineering students.  

 

Cover Page

Approval Page

Dedication 

Acknowledgement 

Abstract 

Table of Content 

CHAPTER ONE

1:0:0INTRODUCTION 

1:1:0 Objective

1:2:0Scope of Work  

CHAPTER TWO 

2:0:0LITERATURE REVIEW

2:1:0Description of Transformer 

2:2:0Classification of Transformer 

2:3:0Types of Transformer  

2:4:0Division of Transformer 

CHAPTER THREE   

3:0:0Purpose of the Device   

3:1:0Division of Transformer  

3:2:0Uses  

3:3:0Significance of Transformer (Device)   

CHAPTER FOUR 

4:0:0CONSTRUCTION OF TRANSFORMER  

4:1:0Cutting of Lamination 

4:2:0Construction of Former  

4:3:0The Winding

4:4:0Insulation

4:5:0Construction of Rectifier 

4:6:0Materials Used  

CHAPTER FIVE 

5:0:0PRINCIPLE OF OPERATION  

5:1:0Major Factor Considered 

5:2:0Rectifier Operations 

5:3:0Components Used 

5:4:0Connection of Transformer to Rectified

 

CHAPTER SIX

6:0:0Conclusion 

6:1:0Summary 

6:2:0Problem Encountered 

6:3:0Recommendations 

Bill of Quantity