The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion.
In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow tends to dissolve slowly at room temperature, whereas, soap of palm kernel oil product gives a quicker lather which is relatively suitable.
Different formulation were developed, but the most appropriate was the ratio 2:1 of P.K.O to caustic soda solution. This ratio gave a very quality soap. The other formulation are 3:1 and 1:1 of good quality and physically, they were observed to be brittle.
The test and analysis carried out on the P.K.O and the soap produced proved that the saponification value of the P.K.O was 248.24; refractive index was 1.451, free fatty value of 1.58; acid value of 4.43; moisture content of 26.78%; free alkali of 0.214%, alcohol insoluble matter of 1.43% and PH value of 9.98 at a temperature reading 2980c. The soap was moderately soft and very soluble in water.
The quality of soap produced conformed to all the requirements for toilet soap from Standard Organization of Nigeria (SON). It was found out that the soap has no inferiors effect on the skin; does not contain any visible foreign matter which means that the soap was properly mixed, does not encourage microbial growth and lathers effectively.
It was also found that the cost of producing the herbal/medicated or antiseptic soap was N63.00k compared to that sold in the market for N100.00k per tablet. Thus, the production based on the research work was profitable and more economical.
Soap is defined as the sodium salt of fatty acid. It is a saponification products of fat and oil.
The washing industry, usually known as the soap industry, has root over 2000 years in the past, a soap factory being found in the Pompeii excavation. However, among the many chemical process industries, none has experience such a fundamental change in chemical raw materials as have the washing industries. It has been generally accepted that the per capital use of toilet soap is a reliable guide to the standard of living for any country.
Moreover, the process of soap making has progressed from batch-wise saponification process to continous saponification process, which was first installed in 1937 by procter and gamble.
In otherwords, soap is the earliest detergent known to man and apparently was first made by the Roman from animal’s fats and wood ashes (which contains the alkali potassium carbonate) about 2500 years ago. In colonial America and until the 1940s, most soap was manufactured by an alkaline hydrolysis reaction called saponification.
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 12). Formulation And Production Of Levera Soap.. ProjectStoc.com. Retrieved 12, 2014, from https://projectstoc.com/read/5523/formulation-and-production-of-levera-soap-752
"Formulation And Production Of Levera Soap." ProjectStoc.com. 12 2014. 2014. 12 2014 <https://projectstoc.com/read/5523/formulation-and-production-of-levera-soap-752>.
"Formulation And Production Of Levera Soap.." ProjectStoc.com. ProjectStoc.com, 12 2014. Web. 12 2014. <https://projectstoc.com/read/5523/formulation-and-production-of-levera-soap-752>.
"Formulation And Production Of Levera Soap.." ProjectStoc.com. 12, 2014. Accessed 12, 2014. https://projectstoc.com/read/5523/formulation-and-production-of-levera-soap-752.
- Related Works
- A Proposed Design For The Correction Of Fouling In Condensers
- Extraction And Formulation Of Perfume From Plant
- Interface Monitoring And Analysis Of Pipeline And Products Marketing Company Limited Enugu Depot
- Production Of Emulsion Point With The Available Material
- Assessment Of Carbon Monoxide (co) Level In Enugu Metropolis Monitoring Industrial And Residential Area
- Desulphurisation Kerosene
- Construction Of A Simple Size Reduction Machine
- The Effect Of Temperature On Hydrolysis Of Cellulose (saw-dust)
- Repair And Refurbishing Of Pilot Plant Temperature Control Apparatus
- Extraction Of Oil From Local Seed (groundnut Seed) & Characterization