ABSTRACT
After detailed study on machines and levers, the construction work started as follows:-
Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out is located at the sequence of operation in subsequent pages.
The machine has scale of 1:5 in all parts of its dimensions. However, brief dimensions are given below:-
Upper surface of bowl - 850mm
Inner surface of bowl - 335mm
Stand height - 325mm
Diameter of wheel - 250mm
Diameter of shaft seating and the shaft 4mm
Thickness of type - 75mm
The drawing of the project was done and enclosed at the end page of this booklet. At last, a 150kg capacity of conveying machine was constructed.
TABLE OF CONTENTS
Title pages
Title page
Approval page
Dedication page
Acknowledgment page
Abstract
CHAPTER ONE
Introduction
Historical background
1.2 Need for constructing the machine
CHAPTER TWO
THEORY/LITERATURE SURVEY
2.1 Types of load to be carried by the conveyor
2.2 Operation of the wheel-barrow
CHAPTER THREE
3.1 Equipments/tools employed during construction of the wheel-barrow
3.2 Materials of construction
3.3 Construction procedure
3.4 Sequence of operation
3.5 Design calculations
3.6 Calculations basic on the bowl
3.7 Specifications
3.8 Project drawing
CHAPTER FOUR
COSTING OF PORTABLE WHEEL-BARROW
4.1 Material cost analysis
4.2 Labour cost analysis
4.3 Miscellaneous costs
Total cost
CHAPTER FIVE
5.1 Discussion
5.2 Precautions taken during construction
5.3 Cautions to users
5.4 Recommendations
5.5 Conclusions
References
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 12). Construction Of Portable Wheel-barrow.. ProjectStoc.com. Retrieved 12, 2014, from https://projectstoc.com/read/5521/construction-of-portable-wheel-barrow-5809
"Construction Of Portable Wheel-barrow." ProjectStoc.com. 12 2014. 2014. 12 2014 <https://projectstoc.com/read/5521/construction-of-portable-wheel-barrow-5809>.
"Construction Of Portable Wheel-barrow.." ProjectStoc.com. ProjectStoc.com, 12 2014. Web. 12 2014. <https://projectstoc.com/read/5521/construction-of-portable-wheel-barrow-5809>.
"Construction Of Portable Wheel-barrow.." ProjectStoc.com. 12, 2014. Accessed 12, 2014. https://projectstoc.com/read/5521/construction-of-portable-wheel-barrow-5809.
- Related Works
- Construction Of A Stell Cupboard
- Construction Of A Simple Paint Mixer
- Assessment Of Carbon Monoxide (co) Level In Enugu Metropolis Monitoring Industrial And Residential Area
- Temperature And Water Requirement For Leaching Of Caustic Alkali From ‘ngu’
- Construction Of Metal Sharpening And Dulling Device
- A Comparative Study Of Chemical And Microwave Synthesized Activated Carborn From Corn Cob
- Manufacture Of Ceiling Board Using Local Materials
- Refining Of Vegetable Oil With Enugu Coal
- Formulation Of Artist Paint
- Rheological Properties Of Neem Biodiesel And Biodiesel/petrodisel Blend