ABSTRACT
The hydrocyclone is a separating device used for the separation of dust particles from air, which has no moving component parts. This mechanism can also be defined as a system of winds circulating about a center of relatively low barometric pressure and on the earths surface, blowing inward in spiral form.
This project is constructed for the separation of liquid – liquid and solid – liquid mixture, like air and dust mixture, dust and liquid drop. This equipment is constructed to separate dust air mixture input of about 25m3/h.
The equipment was constructed with flat sheet metal plate of a desired standard. The dimensioned and for truncated parts were coupled and welded in other to fasten the parts together. The material used in this construction is mild sheet. This material was selected to avoid the effect of rust of material due to contact of the separating item or material with the walls of metal sheet.
In considering the rating of this instrument, it is capable of sparing a gas-dust mixture of about 70% pure compared to the one used in commercial industries. That has the offering of product at around 90% pure. The total material cost of this equipment is ten thousand naira (N10,000).
The effect of hydrocyclone had been of much help especially in the pharmaceutical and photographic industries in the process of particle size separation. It is use to separate a mixture of particle size within the range of 4 and 95 m. The moving or relative speed for this model during separation is 4mls.
TABLE OF CONTENT
TITLE PAGE
LETTER OF TRANSMITTAL
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
INTRODUCTION
OBJECTIVE OF THE PROJECT
CHAPTER TWO
LITERATURE REVIEW
HISTORICAL REVIEW OF PARTICLE SIZE SEPARATION
THEORY OF PARTICLE SIZE SEPARATION
MATERIAL BALANCE FOR SCREENING
THEORY OF OPERATION
USES OF HYDROCYCLONE
TYPES OF MECHANICAL SIZE SEPARATION EQUIPMENT
FEATURES OF THE HYDROCYCLONE
COLLECTION EFFICIENCY OF A TYPICAL HYDROCYCLONE
COSTING ESTIMATION
DISADVANTAGES OF HYDROCYCLONE
MATERIAL OF CONSTRUCTION
CHAPTER THREE
CONSTRUCTION OF A HYDROCYCLONE
CHAPTER FOUR
DISCUSSION
RECOMMENDATION
CONCLUSION
REFERENCES
TABLE FOR NOMENCLATURE
APPENDIX
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 12). Construction Of A Hydrocyclone.. ProjectStoc.com. Retrieved 12, 2014, from https://projectstoc.com/read/5383/construction-of-a-hydrocyclone-6294
"Construction Of A Hydrocyclone." ProjectStoc.com. 12 2014. 2014. 12 2014 <https://projectstoc.com/read/5383/construction-of-a-hydrocyclone-6294>.
"Construction Of A Hydrocyclone.." ProjectStoc.com. ProjectStoc.com, 12 2014. Web. 12 2014. <https://projectstoc.com/read/5383/construction-of-a-hydrocyclone-6294>.
"Construction Of A Hydrocyclone.." ProjectStoc.com. 12, 2014. Accessed 12, 2014. https://projectstoc.com/read/5383/construction-of-a-hydrocyclone-6294.
- Related Works
- A Comparative Study Of Chemical And Microwave Synthesized Activated Carborn From Corn Cob
- The Effect Of Liquid Floerate And Gas Flowrate On A Packed Absorption Tower And Repair Of Equipment
- Construction Of Soap Cutting Device
- Alternative Raw Material Soures For Cement Production
- Temperature And Water Requirement For Leaching Of Caustic Alkali From ‘ngu’
- Construction Of Table Top Liquidliquid Extraction Unit
- Effect Of Interface On The Quality Of Petroleum Product In Multi Purpose Pipeline System
- Head Loses In Horizontal And Vertical Orificemeter A Comparative Evaluation And Analyses With Apllication Of Statistical Method Of Data Reliability
- Comparative Analysis Of Coal, Fuel Oil And Natural Gas For Cement Production
- The Construction Of Sieve Analysis Equipment