Design And Implementation Of A Computerized Erosion Control Information System Case Study Of Ministry Of Works Enugu)

Soil Erosion is an endemic problem in different part of the world especially places where there is marks of seasonal rainfall.  This overland flow resulting  from rain splash erosion and through flow of surface, flow appear to be too extremes of a continuous sequence and is a possible condition for gully development.  In order to prevent this gully development a body must or has been established to study and check the erosion development in so many areas.  As this project tends to focus on the erosion control system in Enugu using  ministry of works as our case study.  Our limit does not extend more than Enugu, Ministry of works in the body responsible for the control of erosion in Enugu state.

Title page  

Certification

Dedication

Acknowledgement

Abstract  

Table of content  

CHAPTER ONE

1.0  Introduction

1.1  Background of the study

1.2  Statement of the problem

1.3  Purpose of the study

1.4  Scope of the study

1.5  Objective of the study

1.6  Definition of terms

CHAPTER TWO

2.0  LITERATURE REVIEW

CHAPTER THREE

3.0  Overview of the existing system

3.1  Description and analysis of the existing system

3.2  Method of data collection

3.2.1Interview method

3.2.2Reference to written text

3.3  Input analysis

3.4  Process analysis

3.5  Output analysis

3.6  Problem of the existing system

3.7  Justification of the new system

CHAPTER FOUR

4.0  Design of the new system

4.1  Output specification

4.2  Input specification

4.3  File design

4.4  Procedure  chart

4.5  System flow chart

4.6  System requirement

CHAPTER FIVE

5.0  Implementation 

5.1  Program design

5.2  Program flow chart

5.3  Pseudo code

5.4  Source listing

5.5  Test run

CHAPTER SIX

6.0  DOCUMENTATION

CHAPTER SEVEN

7.0  Recommendation and conclusion

7.1  References

7.2  Appendix