ABSTRACT
This project intended to simplify the description and working principle of FM wireless microphone, which works on a fixed frequency modulation (FM) band.
TABLE OF CONTENTS
Approval Sheet
Title Page
Dedication
Acknowledgement
Abstract
CHAPTER ONE
1.0INTRODUCTION
1.1Aim and Objective of Investigation
CHAPTER TWO
2.0Transmitter
2.1Ionospheric Propagation
2.2Modulation
2.3Needs for Modulation Process
CHAPTER THREE
3.0Frequency Modulation
3.1Characteristic of An FM Wave
3.2Frequency Modulation Detectors
3.3Method of Generating and Detecting F.M
3.4Resonance
3.5Oscillation
CHAPTER FOUR
4.0The Radio Tuner
CHAPTER FIVE
5.1Function of Transmitter (With Block Diagram)
5.2Resistor and Used in the Project
5.3Capacitors
5.4Variable
5.5Transistor
5.6Aerial
5.7Microphone
5.8Power Supply Unit
CHAPTER SIX
6.0Conclusion
6.1Background Information
References
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2013, 03). Design And Construction Of An Fm Wireless Microphone.. ProjectStoc.com. Retrieved 03, 2013, from https://projectstoc.com/read/1234/design-and-construction-of-an-fm-wireless-microphone
"Design And Construction Of An Fm Wireless Microphone." ProjectStoc.com. 03 2013. 2013. 03 2013 <https://projectstoc.com/read/1234/design-and-construction-of-an-fm-wireless-microphone>.
"Design And Construction Of An Fm Wireless Microphone.." ProjectStoc.com. ProjectStoc.com, 03 2013. Web. 03 2013. <https://projectstoc.com/read/1234/design-and-construction-of-an-fm-wireless-microphone>.
"Design And Construction Of An Fm Wireless Microphone.." ProjectStoc.com. 03, 2013. Accessed 03, 2013. https://projectstoc.com/read/1234/design-and-construction-of-an-fm-wireless-microphone.
- Related Works
- Consequences Of Integration In Digital System Designs
- Design And Construct A Multiremote Controller Using Infra-red Mode Of Transmission
- Design And Construction Of Automatic Power Chaneover System
- Design And Implementation Of Biometric Features Pre-processing
- Design And Construction Of An Inverter Type Arc Welding Machine
- Construction Of A Microcontroller Based Gate
- Design And Construction Of Public Address System
- The Design And Construction Of House Bell With Indicating Light
- Transmitter
- 12 Volts Automatic Battery Charging System