ABSTRACT
The end-of-course grades assigned by lecturers are intended to convey the level of
achievement of each student in the class. These grades are used to make a multitude
of decisions. Unless a sufficiently, accurate and efficient method is used for the
grading, the grades are applied to convey misinformation and lead the decision-
maker astray. In itself, the processing of results is found to be rather tedious,
especially when carried out manually, and when the number of students is large. It is
time-consuming and error prone. The process, however, becomes a lot easier and
much more accurate when carried out with a computer running a suitable software
application. To find a sufficiently fast and accurate method of carrying out this
processing is a problem that is both challenging and interesting. In this work, a
computer software application was developed to facilitate the automated processing
of the results. The software was developed in visual basic programming language.
The developed software performed well and produced expected results on
completion. With it, it was possible to compute Grade Point Average and
Cumulative Grade Point Average for each student based on examination scores entered
CHAPTER ONE
Introduction
CHAPTER TWO
Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
CHAPTER FOUR
Design Presentation
CHAPTER FIVE
GENERAL CONCLUSION
SUMMARY/CONCLUSION.........
RECOMMENDATION...............
References
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2017, 04). Design And Implementation Of Cgpa Using Visual Basic.. ProjectStoc.com. Retrieved 04, 2017, from https://projectstoc.com/read/8439/design-and-implementation-of-cgpa-using-visual-basic-5628
"Design And Implementation Of Cgpa Using Visual Basic." ProjectStoc.com. 04 2017. 2017. 04 2017 <https://projectstoc.com/read/8439/design-and-implementation-of-cgpa-using-visual-basic-5628>.
"Design And Implementation Of Cgpa Using Visual Basic.." ProjectStoc.com. ProjectStoc.com, 04 2017. Web. 04 2017. <https://projectstoc.com/read/8439/design-and-implementation-of-cgpa-using-visual-basic-5628>.
"Design And Implementation Of Cgpa Using Visual Basic.." ProjectStoc.com. 04, 2017. Accessed 04, 2017. https://projectstoc.com/read/8439/design-and-implementation-of-cgpa-using-visual-basic-5628.
- Related Works
- Extracting Data From Published Graphs
- Design And Implementation Of Database System For Patient Management System (a Case Study Of Delta Hospital Onitsha)
- Design And Implementation Of Computerized Hospital Information Management System
- Design And Implementation Of Computerised Grading System
- Design And Implementation Of Protocol Scrubbing: Network Security Through Transparent Flow Modification
- The Impact Of Application Of Information And Communications Technology (ict) In The Administration Of Polytechnics In Ogun State, Nigeria
- Design And Implementation Of A Computer Based Bill Of Material Processing System.
- Design And Implantation Of Computerized Child Care Information System. Case Study (united Nation International Children Emergency Fund, (unicef)
- Design And Implementation Of Web Enabled Supply Chain Management A Case Study Of Emenite Plc Enugu
- Design And Implementation Of A Computer Based Cartographic System (case Study Npc Enugu)