ABSTRACT
Soil Erosion is an endemic problem in different part of the world especially places where there is marks of seasonal rainfall. This overland flow resulting from rain splash erosion and through flow of surface, flow appear to be too extremes of a continuous sequence and is a possible condition for gully development. In order to prevent this gully development a body must or has been established to study and check the erosion development in so many areas. As this project tends to focus on the erosion control system in Enugu using ministry of works as our case study. Our limit does not extend more than Enugu, Ministry of works in the body responsible for the control of erosion in Enugu state.
TABLE OF CONTENT
Title page i
Certification ii
Dedication iii
Acknowledgement iv
Abstract vi
Table of content vii
CHAPTER ONE
1.0 Introduction
1.1 Background of the study
1.2 Statement of the problem
1.3 Purpose of the study
1.4 Scope of the study
1.5 Objective of the study
1.6 Definition of terms
CHAPTER TWO
2.0 LITERATURE REVIEW
CHAPTER THREE
3.0 Overview of the existing system
3.1 Description and analysis of the existing system
3.2 Method of data collection
3.2.1 Interview method
3.2.2 Reference to written text
3.3 Input analysis
3.4 Process analysis
3.5 Output analysis
3.6 Problem of the existing system
3.7 Justification of the new system
CHAPTER FOUR
4.0 Design of the new system
4.1 Output specification
4.2 Input specification
4.3 File design
4.4 Procedure chart
4.5 System flow chart
4.6 System requirement
CHAPTER FIVE
5.0 Implementation
5.1 Program design
5.2 Program flow chart
5.3 Pseudo code
5.4 Source listing
5.5 Test run
CHAPTER SIX
6.0 DOCUMENTATION
CHAPTER SEVEN
7.0 Recommendation and conclusion
7.1 References
7.2 Appendix
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2014, 12). Design And Implementation Of A Computerized Erosion Control Information System Case Study Of Ministry Of Works Enugu).. ProjectStoc.com. Retrieved 12, 2014, from https://projectstoc.com/read/5863/design-and-implementation-of-a-computerized-erosion-control-information-system-case-study-of-ministry-of-works-enugu-3107
"Design And Implementation Of A Computerized Erosion Control Information System Case Study Of Ministry Of Works Enugu)." ProjectStoc.com. 12 2014. 2014. 12 2014 <https://projectstoc.com/read/5863/design-and-implementation-of-a-computerized-erosion-control-information-system-case-study-of-ministry-of-works-enugu-3107>.
"Design And Implementation Of A Computerized Erosion Control Information System Case Study Of Ministry Of Works Enugu).." ProjectStoc.com. ProjectStoc.com, 12 2014. Web. 12 2014. <https://projectstoc.com/read/5863/design-and-implementation-of-a-computerized-erosion-control-information-system-case-study-of-ministry-of-works-enugu-3107>.
"Design And Implementation Of A Computerized Erosion Control Information System Case Study Of Ministry Of Works Enugu).." ProjectStoc.com. 12, 2014. Accessed 12, 2014. https://projectstoc.com/read/5863/design-and-implementation-of-a-computerized-erosion-control-information-system-case-study-of-ministry-of-works-enugu-3107.
- Related Works
- Design And Implementation Of Web Test Tool Application Design And Measure Performance (case Study Of Kiamotors Enugu)
- Design And Development Of A Management Information System (a Case Study Of Ebonyi State University Ebsu Abakaliki
- Design And Implementation Of A Computer Based Human Resources Management Information System (a Case Study Of Nitel Plc Enugu)
- Design And Implementation Of A Computerized Point Of Sales System (a Case Study Of Golden Toast Enugu)
- Design And Implementation Of Computerised Banking Monitor Information System (a Case Study Of Central Bank Plc Enugu).
- Design And Implementation Of A Computerized Database Updating System For A Transaction –drive/operation A Case Study Of Nigerian Stock Exchange (nse) Lagos
- Electronic Payment System Security
- Personal Authentication Using 3-d Finger Geometry
- Design And Implementation Of A Microprocessor- Based Simulation Industrial Arm
- Design And Implementation Of An Expert Management System For Automobile Fault Detection And Diagnosis